How to Choose Your Paint Color Protection
There are many options when it comes to car wax, paint sealant and paint protection. When it comes to the choice you want to make sure that your choice includes the protection of life, appearance and do not forget the trick. With these key features in mind, we will continue and have a deep insight into the chemical composition of the paint protection.
The traditional paste wax – Paste waxes are generally larger and Technology is a hard waxy substance, which contains the spirits produced from silicon and minerals in a temporary shine. They are often difficult to apply and remove. In fact, the pressure needed to remove wax residue, is also part of the protection against wear, ideally wax left on the surface for protection.
Based on carnauba wax – The real carnauba wax is soft, easily waxes, which are usually a bit expensive and it is known, does not use long life. These waxes are commonly used as padding. Frequently used acrylic paint on sealants has a bit of shine. Carnauba wax works well in all colors, but are shown in darker colors and deeper. Fall protection is that pure carnauba melts at about 160 to 170 degrees, so that the eye is rapidly disappearing and the protection is not supported in the warm, sunny days, especially in dark colors, which tend to win the heat. Basically put it where you want to look good, but do not expect that it’s enough.
Cleaner wax – The wax is a cleaner one step, that a certain ability to polish and protection. They work well for people with a surface that is free from defects and the use of protection. The wax is usually cleaner the same aggressiveness as a pre-wax cleaner. The problem with wax is clean, the cause of the cleaners that are not in a position to want the best protection on the surface of the paint more serious protection, which can not pursue a cleaner wax.
Synthetic colors sealants – The perfect man of wax! New technique reveals sealing resin coating offer a serious and lasting protection. Unlike conventional waxes, sealants, synthetic paint temperatures of over 1000 titles to make them more durable. If you choose a synthetic paint sealant, you need to know the difference between the two basic types of synthetic paint sealants. While both provide good protection, which can vary in brightness and softness. Synthetic polymer paint on sealant quality usually offer the best protection, shine and softness, while acrylic sealant that provides good protection, but not as elegant and may need a little help for an ornament Carnauba brightness.
Now that you know the difference between traditional waxes and synthetic sealants, a decision may be what works best for you. There are no rights or wrong choice, just be sure to protect your paint and keep it protected!
Paint Protect Instructions (PPI)
Always work in a shady spot and a cold surface.
To begin the process of wax or paint sealant application, start the upper surfaces of your car. Apply a thin layer of car wax or paint sealant with a quality microfiber or foam wax applicator working in a back and forth in the direction of the plate or in the line of cars. This process can also be done with a hard surface in a dual action polisher.
If you are ready to apply car wax or paint sealant is on the entire vehicle must wait until it heals and binds to the color. Normally it takes about 15-20 minutes but may take longer depending on the type of car wax or paint sealant and weather conditions.
Test a small area by a “test shock” to see if your car is sealing wax or paint waste ready to remove. For this test with your finger quickly clean a small area of the wax remains. If it smears, wait a little longer if you keep clean, it’s time to clean.
Start your car wax or paint removal in the same place he began his application. With a high quality microfiber polishing, polishing with a back and forth, as it did during its application. As you work, turn the towel often to show a soft side and sometimes you pull out all the rubble.
For best results, repeat the process of protecting about 12 hours or more after the car wax or paint sealant had the opportunity to strengthen the link and finish your painting. A second layer is to ensure uniform coverage and to increase the brightness.