Always work in a shady spot and a cold surface.

To begin the process of wax or paint sealant application, start the upper surfaces of your car. Apply a thin layer of car wax or paint sealant with a quality microfiber or foam wax applicator working in a back and forth in the direction of the plate or in the line of cars. This process can also be done with a hard surface in a dual action polisher.

If you are ready to apply car wax or paint sealant is on the entire vehicle must wait until it heals and binds to the color. Normally it takes about 15-20 minutes but may take longer depending on the type of car wax or paint sealant and weather conditions.

Test a small area by a “test shock” to see if your car is sealing wax or paint waste ready to remove. For this test with your finger quickly clean a small area of ​​the wax remains. If it smears, wait a little longer if you keep clean, it’s time to clean.

Start your car wax or paint removal in the same place he began his application. With a high quality microfiber polishing, polishing with a back and forth, as it did during its application. As you work, turn the towel often to show a soft side and sometimes you pull out all the rubble.

For best results, repeat the process of protecting about 12 hours or more after the car wax or paint sealant had the opportunity to strengthen the link and finish your painting. A second layer is to ensure uniform coverage and to increase the brightness.