Knowing the Car Components that Affected Water
The rainy season has arrived, car users have to do extra preparation in anticipation of a strike or any part of the vehicle is damaged due to enter a car or just get wet. It is therefore important to know part of the vehicle that is sensitive to the water is very important, include:
- Spark plugs, electronic fuel injection (EFI), coils, distributors, and platinum.
- Alternator, if submerged in water it can make a sound accompanied by the reduction of electric power. Even if the water mixed with mud, the engine may die suddenly.
- Air filters, if water enters through the carburetor and the engine was forced to live or walk, it can cause the piston bent or even broken. The same result can occur if water enters through the air intake.
- Air holes transmission, because this section can be passed water, it was likely mixed with transmission oil. As a result it may cause noise or at least result in loss or rusty gear.
- Braking system, it will not work perfectly because of the water. Note the rubber brake. To drum or disc system, which has been torn rubber can cause water to inundate parts of it, and caused the rust that eventually tie up the brake system as a whole.
Easy Way to Removes Stains in Car Seat
The following tips are easy to treat stains on car seats
- Clean the upholstery with a vacuum cleaner
- Spray the detergent into a car seat
- Brush your seat until the stains disappear
- Drain by using a vacuum cleaner
- Spray the car deodorizers
- Use the seat cover to keep seat from stains
Although this paper a bit, I still hope I hope this article useful for you.
Caring Motorcycle Paint so Always Glossy
One of the biggest factors in causing the fine scratches (swirl marks) is the error when washing your bike a custom paint, so do not underestimate this problem. Here are the steps:
1. Shampoo
Car shampoo / motor to paint oven is best to use bike wash, do not ever use detergent (dab of soap, laundry soap) to wash the body, because it implies a very loud and not appropriate to paint our motors.
2. Water spray
Spray with water around the motor, especially the paint oven, making sure that dirt and dust is gone, and then flatten foam shampoo starts from the top first. Repeat until completely sure if the motor is completely clean. Spray the section that had been cleaned up to the rest of the soap is lost and really clean.